Terraco EIFS strives to utilise the most suitable type of insulation board depending on the job at hand:
Expanded Polystyrene Insulation Board (EPS) is the most cost effective board used for general application and new buildings
Graphite EPS has 10% more efficient insulation properties, hence thinner sections are required and the product lends itself well for renovation work.
Extruded Polystyrene Insulation Board (XPS) has excellent impact resistance for special use in high traffic areas of where impact can be expected. It is also excellent for hot countries where a board with low vapour permeability is desired.
Mineral Wool Insulation Board (MW) has high breathability and is completely fireproof, so its use with wooden substructures is recommended. It is also recommended where the moisture level in the substrate is high.
Fastener with Steel Expansion Pin
Fastener with Plastic Expansion Pin
Fastener for Aerated Lightweight Concrete (ALC)
Terraco EIFS Glass Fibre Mesh
Adhesive – Styrofix
A polymer modified dry-mix adhesive promoting excellent adhesion between various substrates and the insulation boards
Basecoat - Styrobond
A polymer modified drymix basecoat, applied over the insulation boards, which gives the system impact resistance and flexibility. The reinforcing glass fibre mesh is embedded into Styrobond DP prior to application of finish coats
Terraco offers a comprehensive range of primers for use with Terraco EIFS and these include P Primer Pigmented, P Primer Clear, P Primer Textured and Silprime.
+27 79 7799269
(External Insulation Finishing System)